ComfortStall rubber topcoat features five layers of non-toxic vulcanised sheeting. Crumb rubber featured in geotextile flooring can be toxic and all rubber is toxic when burnt.

While most rubber stall matting requires multiple sheets, ComfortStall’s IronClad TopCover is installed as a single piece of material that using a boxcutter, you will trim to the individual size for your needs. The impermeable surface allows for a completely sealed stall floor with no escape routes for urine, muck, or bedding.

ComfortStall is a self-fit product. Detailed installation instructions can be found here or you can view our installation video below.

While standard rubber stall matting offers limited cushion and requires a considerable amount of bedding to provide support to your horse, ComfortStall on its own gives your horse all the cushion he requires. With ComfortStall, we suggest using only a small amount of absorbent bedding where your horse most frequently urinates to soak up any liquids.

While standard rubber Standard rubber stall mats do not absorb urine, but the gaps in between the mats allow for urine to seep through to the subsurface where it tends to pool. This creates the perfect environment for urea to react with bacteria and off-gas as the respiratory irritant ammonia. Since ComfortStall is both impermeable and fully sealed, urine stays on top of the TopCover and is easily removed when mucking out or with a quick wash or sweep.

Yes, ComfortStall is a great horse float flooring option, it can also be fitted up the walls. We would however advise to not fit studs or allow a horse with studs fitted to stand on ComfortStall, as this could cause damage to the TopCover. Standard nails and road studs are safe to stand on ComfortStall. 

Remove the droppings and wet bedding with a shavings fork or small shovel. ComfortStall on its own gives your horse all the cushion he requires. However, we suggest using a small amount of absorbent bedding where your horse most frequently urinates to soak up any liquids. If using bedding, remove the wet shavings and sweep out. If you are not using bedding the urine can be swept or washed out of the stable. This should only take 5-10 mins.

ComfortStall’s IronClad TopCover is incredibly durable and will not puncture or tear easily. However, we would advise to not fit studs or allow a horse with studs fitted to stand on ComfortStall, as this could cause damage to the TopCover. Standard nails and road studs are safe to stand on ComfortStall.

Rubber stall mats tend to be slippery when wet. However, ComfortStall’s IronClad TopCover is an anti-slip material. Additionally, the cushion provided by the orthopaedic foam causes the horse to sink slightly into the surface for additional grip.